| Paper | Liquity: Decentralized Borrowing Protocol |
|---|---|
| Authors | Robert Lauko and Richard Pardoe, as listed in the accessible paper copy |
| Revision and date | rev. 0.3, April 5, 2021 |
| Project and version | Liquity V1, Ethereum |
| Document license | Not verified; an MIT license is not assumed |
| Source note | Liquity’s official announcement links to a DocSend copy that returned 403 during this review. The accessible PDF linked below is a third-party-hosted copy, not an official Liquity file host. |
What the paper describes
The 2021 Liquity V1 paper presents a way for Ether holders to create liquidity without a lender setting a recurring interest rate. A user locks ETH in a collateralized debt position (CDP), called a Trove in Liquity, and mints LUSD, a dollar-referenced stablecoin. The paper’s central design choices are a one-time borrowing fee, a Stability Pool that absorbs liquidations, redemptions into ETH, and rules intended to operate without routine governance changes.
| Original paper | Original paper |
|---|---|
| Directories | Ethereum Whitepapers & Research |
The official Liquity announcement says the first paper appeared in May 2020 and that the February 2021 revision added or clarified batch and out-of-order liquidations, Recovery Mode, the Liquidation Reserve, redemption handling, and fee-slippage protection. This page focuses on that revised V1 design. Its claims about a price floor or capital efficiency describe the mechanism’s intended incentives; they are not guarantees that LUSD will trade at one dollar or that users will avoid losses.
Borrowing with a V1 Trove
Liquity V1 accepts ETH as collateral and issues LUSD. Under normal operation, a Trove must stay at or above a 110% minimum collateral ratio: $110 of ETH value for each $100 of debt. That is a protocol threshold, not a recommended safety margin. A fall in ETH’s price can push a position toward liquidation even when the borrower has not changed it.
“Interest-free” means there is no recurring V1 interest charge. Borrowing instead incurs a one-time algorithmic fee, which changes with redemption activity and has a documented minimum of 0.5%; the V1 documentation also describes a 5% upper bound. Opening a Trove adds a 200 LUSD Liquidation Reserve to the debt; the reserve is returned when the Trove is closed without liquidation. V1 also sets a minimum debt. These mechanics make the timing, market price of LUSD, gas, and the borrower’s chosen collateral buffer relevant to the total cost.
A CDP or Trove is not the same as a loan from a bank. The user remains exposed to ETH price movements, contract and oracle risks, and the possibility of losing collateral through liquidation. The V1 borrowing FAQ explains the collateral, fee, repayment, and collateral-ratio rules in more detail.
Stability Pool and liquidations
Liquity’s Stability Pool is funded with LUSD deposits. When an eligible Trove is liquidated, the protocol uses LUSD from the pool to cancel debt and transfers collateral to Stability Providers in proportion to their remaining deposits. A deposit can therefore shrink while its holder receives ETH; the outcome depends on the liquidation and asset prices, and is not a guaranteed yield. If the pool cannot absorb all of a liquidation, V1 can use redistribution, assigning remaining debt and collateral across other Troves.
In normal mode, Troves below the 110% minimum collateral ratio are subject to liquidation. Recovery Mode begins when the system’s total collateral ratio falls below 150%. It restricts borrower actions and increases liquidation exposure for some positions above the normal 110% threshold. The exact rules matter: Liquity’s short Recovery Mode FAQ summarizes eligibility as Troves below 150% being liquidatable, while the 2021 paper update explains TCR-relative eligibility and additional Stability Pool conditions for some higher-collateral Troves. It is inaccurate to say that every Trove below 150% is automatically liquidated. The paper update describes a cap on the liquidation loss and the return of collateral surplus above the amount needed to cover debt and compensation.
Anyone can trigger an eligible liquidation, so borrowers cannot assume that an undercollateralized position will wait for them to act. Stability Providers also face ETH-price, smart-contract, and oracle risks. Liquity’s own documentation warns that a rapid price move or oracle failure can leave the collateral received worth less than the LUSD removed from a deposit.
Redemptions and the LUSD price mechanism
A redemption is different from repaying one’s own Trove. A holder can submit LUSD to receive ETH at the protocol’s face-value calculation, less a variable redemption fee. Redemptions are directed toward Troves with the lowest collateral ratios, reducing their debt and collateral together. This creates an arbitrage incentive when LUSD trades below its reference value, but does not guarantee a market peg: fees, liquidity, access to a suitable interface, collateral prices, and protocol conditions all matter. The 2021 paper and Liquity’s current V1 materials also describe conditions under which redemptions are suspended, including an extreme system-collateralization case.
Borrowing and redemption fees share an algorithmic base rate. Redemptions can raise that rate, while it decays over time. This links the cost of new borrowing to system activity rather than to an administrator changing a recurring interest rate. It also means the fee shown at one moment is not a permanent quote.
Governance, LQTY, and the V2 distinction
The V1 design aims to keep core protocol parameters immutable or algorithmic rather than managed through routine token-holder votes. The paper describes LQTY incentives for Stability Pool participants and front ends, as well as staking tied to protocol fees. These are descriptions of the V1 design and do not imply that rewards are fixed, guaranteed, or risk-free. Governance-free protocol rules also do not remove software, oracle, market, or interface risks.
Liquity V2 is a separate system, not a small update to the LUSD paper. Its official launch announcement dates the Ethereum launch to May 19, 2025. V2 issues BOLD, supports ETH and liquid-staking-token collateral markets, and lets borrowers choose rates. V1’s LUSD, one-time fee model, and single-collateral rules should not be mixed with V2’s BOLD mechanics.
Limits and risks to understand
- ETH collateral can lose value quickly; a 110% minimum leaves little room for a sudden price decline or transaction delay.
- LUSD is intended to track a dollar value, but its market price and liquidity can vary. Redemption mechanics are not a promise of instant, cost-free access to one dollar.
- Stability Pool deposits can be used to repay liquidated debt, and the ETH received can fall in value. A depositor may lose value, including during a sharp price move or oracle problem.
- Borrowers can be liquidated, and redemptions can reduce a Trove’s collateral while also reducing its debt. Front ends, wallets, transactions, and smart contracts introduce additional risks.
- The 2021 paper is historical. For the mechanics of a particular version, distinguish official V1 documentation from V2 documentation and check the current deployed contracts and interface.
Liquity’s design is useful to study because it makes the trade-offs visible: lower minimum collateralization and no recurring V1 interest rely on rapid liquidations, direct redemptions, fee incentives, and a system-wide pool. Those choices change where risk sits; they do not make borrowing or depositing risk-free.
Social Media Sentiment
A small January 28, 2026 Reddit discussion focused mainly on Liquity V2’s BOLD rating. In that thread, one commenter preferred V1’s one-time fee for a long-term ETH-backed position, while another remarked on Liquity’s limited adoption beyond some DeFi venues. Because the discussion was small and mostly about V2, it is anecdotal context rather than a representative measure of V1 users or protocol performance.
Last updated: 2026-10
Related Terms
See Also
- The Dai Stablecoin System (MakerDAO)
- Aave Protocol: Decentralized Liquidity Protocol
- Compound: The Money Market Protocol
Sources
- Liquity: Decentralized Borrowing Protocol, rev. 0.3 (third-party-hosted PDF copy) — Used to confirm the document title, listed authors, date, and core V1 design. The PDF host is not Liquity’s official site.
- Liquity’s official announcement of the February 2021 whitepaper update — Identifies the revised paper and explains changes to liquidation, Recovery Mode, reserves, redemptions, and fees.
- Liquity V1 official documentation — Current V1 overview and scope.
- Liquity V1 borrowing FAQ — ETH collateral, Troves, ratios, fees, and repayments.
- Liquity V1 Stability Pool and liquidation FAQ — Debt offset, collateral distribution, withdrawals, and redistribution.
- Liquity V1 Recovery Mode FAQ — Recovery trigger and borrower-operation restrictions.
- Liquity’s redeemable-stablecoin explanation — Redemption as a peg mechanism, not a guarantee of market price.
- Liquity’s official Liquity V2 launch announcement — Dates V2’s launch and distinguishes BOLD from V1’s LUSD system.
- A January 2026 Reddit discussion about BOLD and Liquity V1 — A limited community sample cited only for anecdotal sentiment, not as technical evidence.